In this report we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and techniques that you can use.
If you have a dog that likes to bark, and especially if your dog loves to play in the backyard and other regions of the house, you need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup which will look a little scary at first, but it’s actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape from the cardboard, so you will have to cut around the edge of the mask so that you get something that resembles a cone. The main thing wooden dog crates for sale here is to be realistic with what kind of paper plate that you’re using.
Then you will need to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so that you can ensure that nothing will leak once you put the mask on. Make sure that the edges are cut so the edges are not sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you are done, so that you don’t wind up with smudges or smears on your dog.
Then it’s time to glue the mask onto your dog’s head. First you need to make sure that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you can begin to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and fold it over. Be sure that it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you’ve got the mask snugged securely onto the face of your dog. Do not make the folds too large or else it might look messy. As soon as you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask onto the dog. Be sure the ears are level and be sure that it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you’re using a dog mask because your pet security, you’ll have to do some sanding to make sure that it’s safe on your dog. You can do this by sanding off any excess paper that may have been eliminated from your mask.